2025-05-21T16:36:47

src/data/pointcalculate.cpp

@@ -9,7 +9,7 @@ QVector<Global::ExperimentData>PointCalculate:: _dataVtr;
 QPointF PointCalculate::_peakPoint;
 QPointF PointCalculate::_leftSelectedPoint,PointCalculate::_rightSelectedPoint;
 
-void PointCalculate::setExperimentData(const QVector<Global::ExperimentData> &dataVtr)
+void PointCalculate::setAnalysisData(const QVector<Global::ExperimentData> &dataVtr)
 {
     _dataVtr = dataVtr;
 
@@ -263,6 +263,8 @@ float PointCalculate::calculateArea() {
         float b = Global::_enthalpyCoefficientVtr.at(1);
         float c = Global::_enthalpyCoefficientVtr.at(2);
 
+        logde<<"a,b,c:"<<a<<","<<b<<","<<c;
+
         coefficient = a * startTemp * startTemp +
                 b * startTemp +
                 c;
@@ -273,6 +275,8 @@ float PointCalculate::calculateArea() {
 
     float area = integral * coefficient * Global::DefaultParamter;
 
+    logde<<"area:"<<area;
+
     return area;
 }
 
@@ -641,7 +645,7 @@ QString PointCalculate::textFormatPeakPointWithTime(const float enthalpyValue, c
                    "起始点：%3min \n"
                    "终止点：%4min"
                    )
-            .arg(QString::number(enthalpyValue, 'f', 3))
+            .arg(QString::number(enthalpyValue, 'f', 4))
             .arg(QString::number(peakValue, 'f', 3))
             .arg(QString::number(startPoint, 'f', 3))
             .arg(QString::number(endPoint, 'f', 3));

src/data/pointcalculate.h

@@ -7,7 +7,7 @@
 #include "global.h"
 
 namespace PointCalculate{
-void setExperimentData(const QVector<Global::ExperimentData>&);
+void setAnalysisData(const QVector<Global::ExperimentData>&);
 
 QPair<QPointF,QPointF> getStartAndEndPoint();
 QVector<Global::ExperimentData> getDataInXRange(const float, const float);

src/data/xlsxhandler.cpp

@@ -213,6 +213,7 @@ void XlsxHandler::writeFile(const QString filePath)
         xlsx.write(row , 1, ConPhaseIndex);
         xlsx.write(row , 2, i + 1);
         row++;
+
         // phase info
         xlsx.write(row , 1, ConPhaseCutoffTemp);
         xlsx.write(row , 2, phase.cutoff_temp);

src/global.h

@@ -32,18 +32,6 @@ const QString RateStr("rate");
 const double DefaultParamter = 8.177;
 
 //
-#if 0
-enum AnalysisMode{
-    Null,
-    NumericalLabel,
-    StartPoint,
-    StopPoint,
-    PeakSynthesisAnalysis,
-    GlassTransition,
-    OnsetTemperaturePoint,
-    EndsetTemperaturePoint
-};
-#endif
 enum Mode{
     Analysis,
     ConnectedToDev,
@@ -126,10 +114,6 @@ extern bool _displayTimeValue;
 QString converDoubleToStr(const double);
 void quadraticLeastSquaresFit(double x[], double y[], int n, double coeff[]);
 double findNegativeStartPoint(double m, double b, double start, double end);
-
 };
 
-
-
-
 #endif // GLOBAL_H

src/mainwindow.cpp

@@ -348,6 +348,7 @@ void MainWindow::slotSaveExperimentalDataMsgBox()
                                   QMessageBox::Yes | QMessageBox::No);
     if (reply == QMessageBox::Yes) {
         saveFile(Global::_experimentInfo.sampleName,Global::Mode::Experiment);
+        _leftWidget->reloadFileName();
     } else {
         on_actionClearAllData_triggered();
     }

src/mainwindow.h

@@ -98,10 +98,6 @@ private:
     void connections();
     void setActionEnable(const bool);
     void setSubWidgetAttribute(QWidget *);
-#if 0
-    bool saveExperimentFile(const QString fileName);
-    bool saveAnalysisFile(const QString fileName);
-#endif
 
     bool saveFile(const QString fileName,const Global::Mode);
 private:

src/ui/centralwidget.cpp

@@ -110,6 +110,12 @@ void CentralWidget::switchAxisMode()
     if(_axisMode == AxisMode::SingleY){
         _axisMode = AxisMode::DoubleY;
 
+        _customPlot->yAxis2->setVisible(true);
+        _customPlot->yAxis2->setLabel(XlsxHandler::ConPhaseHeaderTemp);
+
+        _customPlot->yAxis->setLabel(XlsxHandler::ConPhaseHeaderTime);
+
+#if 0
         _customPlot->yAxis2->setVisible(true);
         _customPlot->yAxis2->setLabel("Time/min");
 
@@ -142,6 +148,7 @@ void CentralWidget::switchAxisMode()
                 //    logde<<"plottableCount count:"<<_customPlot->plottableCount();
             }
         }
+#endif
     }else{
         _axisMode = AxisMode::SingleY;
 
@@ -272,7 +279,7 @@ void CentralWidget::slotRecvAnalysisFileName(const QString &filePath)
     for(int i = 0;i < cfd.phaseTotalVtr.size();i++){
         Global::PhaseTotalInfo& pti = cfd.phaseTotalVtr[i];
 
-        PointCalculate::setExperimentData(pti.dataVtr);
+        PointCalculate::setAnalysisData(pti.dataVtr);
 
         QPair<QPointF,QPointF>startEndPointPair =  PointCalculate::getStartAndEndPoint();
 
@@ -306,6 +313,9 @@ void CentralWidget::slotRecvAnalysisFileName(const QString &filePath)
         pti.curve = _currentCurve;
     }
 
+    // Add data to global parameter.
+    Global::_curveFileDataVtr.push_back(cfd);
+
     // Add analysis operation data.
     if(cfd.analysisOperationVtr.size() > 0){
         for(AnaOpRecorder::AnalysisOperation& ao
@@ -316,13 +326,26 @@ void CentralWidget::slotRecvAnalysisFileName(const QString &filePath)
     // Refresh ui.
     _customPlot->rescaleAxes();
     _customPlot->replot();
-
-    // Add data to global parameter.
-    Global::_curveFileDataVtr.push_back(cfd);
 }
 
 void CentralWidget::slotAnalysisSettingApply()
 {
+    //Set the analysis data corresponding current curve.
+    if(!_currentCurve){
+        logde<<"failed. current curve is nullptr.";
+        return;
+    }
+
+    QVector<Global::ExperimentData> dataVtr;
+    for(Global::CurveFileData& cfd:Global::_curveFileDataVtr){
+        for(Global::PhaseTotalInfo& pti:cfd.phaseTotalVtr){
+            if(pti.curve == _currentCurve){
+                PointCalculate::setAnalysisData(pti.dataVtr);
+                break;
+            }
+        }
+    }
+    //
     double x1 = _line1->point1->coords().x();
     double x2 = _line2->point1->coords().x();
 
@@ -1097,16 +1120,33 @@ void CentralWidget::loadAnalysisData(
         //enthalpy
         double sampleWeight = 0.0f;
         for(Global::CurveFileData& cfd:Global::_curveFileDataVtr){
+
             for(Global::PhaseTotalInfo& pti:cfd.phaseTotalVtr){
+#if 0
                 if(_currentCurve && _currentCurve == pti.curve){
                     sampleWeight = cfd.ei.sampleWeight.toDouble();
                 }
+#endif
+                if(_currentCurve){
+                    if(_currentCurve == pti.curve){
+                        sampleWeight = cfd.ei.sampleWeight.toDouble();
+                    }else{
+                    }
+                }else{
+//                    logde<<"current curve nullptr.";
+                }
             }
         }
-        //        logde<<"sample weight:"<<sampleWeight;
+
+        if(sampleWeight <= 0){
+            logde<<"sample weight set value 1,"<<sampleWeight;
+            sampleWeight = 1;
+        }
 
         double enthalpyValue = PointCalculate::calculateArea() / sampleWeight;
 
+        //        logde<<"enthalpyValue:"<<enthalpyValue;
+
         // peak
         QPointF peakPoint = PointCalculate::getPeakPoint();
 

src/ui/experimentsettingform.cpp

@@ -1,4 +1,5 @@
 #include <QtDebug>
+#include <QDateTime>
 
 #include "experimentsettingform.h"
 #include "ui_experimentsettingform.h"
@@ -22,6 +23,13 @@ ExperimentSettingForm::ExperimentSettingForm(QWidget *parent) : QWidget(parent),
     ui->setupUi(this);
     uiReset();
 
+    ui->checkBox_phase_1->setTristate(false);
+    ui->checkBox_phase_2->setTristate(false);
+    ui->checkBox_phase_3->setTristate(false);
+    ui->checkBox_phase_4->setTristate(false);
+    ui->checkBox_phase_5->setTristate(false);
+    ui->checkBox_phase_6->setTristate(false);
+
     connect(ui->checkBox_phase_2, &QCheckBox::clicked,
             this, &ExperimentSettingForm::slotPhase2StateChanged);
     connect(ui->checkBox_phase_3, &QCheckBox::clicked,
@@ -217,9 +225,10 @@ void ExperimentSettingForm::slotPhase2StateChanged(int state)
     }
     else
     {
+        // unchecked
         if (ui->checkBox_phase_3->isChecked())
         {
-            ui->checkBox_phase_2->setCheckState(Qt::Checked);
+            ui->checkBox_phase_2->setChecked(true);
         }
         else
         {
@@ -281,10 +290,17 @@ void ExperimentSettingForm::slotPhase4StateChanged(int state)
     }
     else
     {
-        ui->phase_4_cutoff_temp->setEnabled(false);
+        if (ui->checkBox_phase_5->isChecked())
-        ui->phase_4_scan_rate->setEnabled(false);
+        {
-        ui->phase_4_constant_temp->setEnabled(false);
+            ui->checkBox_phase_4->setChecked(true);
-        ui->comboBox_phase_4_atmosphere->setEnabled(false);
+        }
+        else
+        {
+            ui->phase_4_cutoff_temp->setEnabled(false);
+            ui->phase_4_scan_rate->setEnabled(false);
+            ui->phase_4_constant_temp->setEnabled(false);
+            ui->comboBox_phase_4_atmosphere->setEnabled(false);
+        }
     }
 }
 
@@ -306,15 +322,24 @@ void ExperimentSettingForm::slotPhase5StateChanged(int state)
     }
     else
     {
-        ui->phase_5_cutoff_temp->setEnabled(false);
+        if (ui->checkBox_phase_6->isChecked())
-        ui->phase_5_scan_rate->setEnabled(false);
+        {
-        ui->phase_5_constant_temp->setEnabled(false);
+            ui->checkBox_phase_5->setChecked(true);
-        ui->comboBox_phase_5_atmosphere->setEnabled(false);
+        }
+        else
+        {
+            ui->phase_5_cutoff_temp->setEnabled(false);
+            ui->phase_5_scan_rate->setEnabled(false);
+            ui->phase_5_constant_temp->setEnabled(false);
+            ui->comboBox_phase_5_atmosphere->setEnabled(false);
+        }
     }
 }
 
 void ExperimentSettingForm::slotPhase6StateChanged(int state)
 {
+    qDebug() << "slotPhase2StateChanged:" << state;
+
     if (state == Qt::PartiallyChecked)
     {
         if (ui->checkBox_phase_5->isChecked())
@@ -340,6 +365,13 @@ void ExperimentSettingForm::slotPhase6StateChanged(int state)
 
 void ExperimentSettingForm::on_pushButton_deliverData_clicked()
 {
+    float phase1CutoffTemp = 0.0;
+    float phase2CutoffTemp = 0.0;
+    float phase3CutoffTemp = 0.0;
+    float phase4CutoffTemp = 0.0;
+    float phase5CutoffTemp = 0.0;
+    float phase6CutoffTemp = 0.0;
+
     QVector<Phase> phaseVtr;
     {
         Phase phase;
@@ -351,6 +383,13 @@ void ExperimentSettingForm::on_pushButton_deliverData_clicked()
         phase.gas = GasType::N2;
 
         phaseVtr.push_back(phase);
+        //
+        phase1CutoffTemp = phase.cutoff_temp;
+        //
+        if(phase.temp_flow <= 0){
+            phaseScanRateErrorMesgBox(1);
+            return;
+        }
     }
     {
         Phase phase;
@@ -362,6 +401,17 @@ void ExperimentSettingForm::on_pushButton_deliverData_clicked()
         phase.gas = GasType::N2;
 
         phaseVtr.push_back(phase);
+        //
+        phase2CutoffTemp = phase.cutoff_temp;
+        if(phase2CutoffTemp < phase1CutoffTemp){
+            phaseCufoffTempErrorMesgBox(2);
+            return;
+        }
+
+        if(phase.temp_flow <= 0){
+            phaseScanRateErrorMesgBox(2);
+            return;
+        }
     }
 
     {
@@ -373,6 +423,17 @@ void ExperimentSettingForm::on_pushButton_deliverData_clicked()
         phase.gas = GasType::N2;
 
         phaseVtr.push_back(phase);
+        //
+        phase3CutoffTemp = phase.cutoff_temp;
+        if(phase3CutoffTemp < phase2CutoffTemp){
+            phaseCufoffTempErrorMesgBox(3);
+            return;
+        }
+
+        if(phase.temp_flow <= 0){
+            phaseScanRateErrorMesgBox(3);
+            return;
+        }
     }
 
     {
@@ -384,6 +445,17 @@ void ExperimentSettingForm::on_pushButton_deliverData_clicked()
         //        phase.gas = ui->comboBox_phase_1_atmosphere->currentIndex();
         phase.gas = GasType::N2;
         phaseVtr.push_back(phase);
+        //
+        phase4CutoffTemp = phase.cutoff_temp;
+        if(phase4CutoffTemp < phase3CutoffTemp){
+            phaseCufoffTempErrorMesgBox(4);
+            return;
+        }
+
+        if(phase.temp_flow <= 0){
+            phaseScanRateErrorMesgBox(4);
+            return;
+        }
     }
 
     {
@@ -396,6 +468,17 @@ void ExperimentSettingForm::on_pushButton_deliverData_clicked()
         phase.gas = GasType::N2;
 
         phaseVtr.push_back(phase);
+        //
+        phase5CutoffTemp = phase.cutoff_temp;
+        if(phase5CutoffTemp < phase4CutoffTemp){
+            phaseCufoffTempErrorMesgBox(5);
+            return;
+        }
+
+        if(phase.temp_flow <= 0){
+            phaseScanRateErrorMesgBox(5);
+            return;
+        }
     }
 
     {
@@ -408,6 +491,17 @@ void ExperimentSettingForm::on_pushButton_deliverData_clicked()
         phase.gas = GasType::N2;
 
         phaseVtr.push_back(phase);
+        //
+        phase6CutoffTemp = phase.cutoff_temp;
+        if(phase6CutoffTemp < phase5CutoffTemp){
+            phaseCufoffTempErrorMesgBox(6);
+            return;
+        }
+
+        if(phase.temp_flow <= 0){
+            phaseScanRateErrorMesgBox(6);
+            return;
+        }
     }
     //
     Global::ExperimentInfo& ei = Global::_experimentInfo;
@@ -451,6 +545,22 @@ void ExperimentSettingForm::slotCancel()
 {
     hide();
 }
+
+void ExperimentSettingForm::phaseCufoffTempErrorMesgBox(const int phaseNum)
+{
+    QString title = QString("阶段%1截止温度错误").arg(QString::number(phaseNum));
+    QString text = QString("阶段%1截止温度不能小于上一阶段截止温度!  ").arg(QString::number(phaseNum));
+    QMessageBox::question(this, title, text,
+                          QMessageBox::Yes);
+}
+
+void ExperimentSettingForm::phaseScanRateErrorMesgBox(const int phaseNum)
+{
+    QString title = QString("阶段%1扫描速率错误").arg(QString::number(phaseNum));
+    QString text = QString("阶段%1扫描速率必须大于0!  ").arg(QString::number(phaseNum));
+    QMessageBox::question(this, title, text,
+                          QMessageBox::Yes);
+}
 void ExperimentSettingForm::slotPhaseCheck()
 {
     if (sender() == ui->checkBox_phase_2)
@@ -605,7 +715,7 @@ void ExperimentSettingForm::slotRecvPhaseInfo(const QByteArray &ba)
     Global::_experimentInfo.phaseVtr = phaseVtr;
 
     //ui update
-//    logde<<"phaseVtr size:"<<phaseVtr.size();
+    //    logde<<"phaseVtr size:"<<phaseVtr.size();
 
     uiReset();
 
@@ -616,15 +726,15 @@ void ExperimentSettingForm::slotRecvPhaseInfo(const QByteArray &ba)
         }
 
         i++;
-//        qDebug()<<"index :"<<i;
+        //        qDebug()<<"index :"<<i;
 
         QString checkBoxName = QString("checkBox_phase_%1").arg(i);
         QCheckBox *checkBox_phase = qobject_cast<QCheckBox*>(this->findChild<QObject*>(checkBoxName));
         if (checkBox_phase) {
             checkBox_phase->setChecked(true);
-//            qDebug()<<"found...";
+            //            qDebug()<<"found...";
         }else{
-//            qDebug()<<"not found...";
+            //            qDebug()<<"not found...";
         }
 
         QString cutOffTempLineEditName = QString("phase_%1_cutoff_temp").arg(i);
@@ -703,3 +813,11 @@ void ExperimentSettingForm::slotRecvPhaseInfo(const QByteArray &ba)
 
 
 }
+
+void ExperimentSettingForm::showEvent(QShowEvent *event)
+{
+    QDateTime currentDateTime = QDateTime::currentDateTime();
+    QString internationalFormat = currentDateTime.toString("yyyy/MM/dd hh:mm:ss");
+
+    ui->dateTimeLineEdit->setText(internationalFormat);
+}

src/ui/experimentsettingform.h

@@ -23,6 +23,8 @@ signals:
     void sigDeliverData(const QByteArray &);
 public slots:
     void slotRecvPhaseInfo(const QByteArray &);
+protected:
+    void showEvent(QShowEvent *event) override;
 private slots:
     void on_pushButton_deliverData_clicked();
 private:
@@ -38,6 +40,9 @@ private:
     void slotPhase6StateChanged(int state);
 
     void slotCancel();
+
+    void phaseCufoffTempErrorMesgBox(const int);
+    void phaseScanRateErrorMesgBox(const int);
 private:
     Ui::ExperimentSettingForm *ui;
 };

src/ui/printpreviewform.cpp

@@ -10,13 +10,15 @@ PrintPreviewForm::PrintPreviewForm(QWidget *parent) :
     QWidget(parent),
     ui(new Ui::PrintPreviewForm)
   ,_printer(new QPrinter(QPrinter::HighResolution))
-  ,_customPrintPreviewDialog(new QPrintPreviewDialog(_printer,this))
+  //  ,_customPrintPreviewDialog(new QPrintPreviewDialog(_printer,this))
 {
     ui->setupUi(this);
 
     _printer->setPageSize(QPageSize(QPageSize::A4));
     _printer->setOrientation(QPrinter::Landscape);
 
+    _customPrintPreviewDialog = new QPrintPreviewDialog(_printer,this);
+
     QObject::connect(_customPrintPreviewDialog, &QPrintPreviewDialog::paintRequested,
                      this,&PrintPreviewForm::slotPaintRequested);
 

src/ui/realtimedataform.cpp

@@ -3,7 +3,7 @@
 #include "ui_realtimedataform.h"
 
 RealTimeDataForm::RealTimeDataForm(QWidget *parent) : QWidget(parent),
-                                                      ui(new Ui::RealTimeDataForm)
+    ui(new Ui::RealTimeDataForm)
 {
     ui->setupUi(this);
 }
@@ -100,5 +100,20 @@ void RealTimeDataForm::slotRevCommonData(const CommonData &data)
     // 扫描速率
     ui->scanRateLineEdit->setText("--");
     // 当前气氛
-    ui->currentAtmosphereLineEdit->setText(QString::number(data.current_gas));
+    QString gasName;
+    switch(data.current_gas){
+    case GasType::NC:
+        gasName = "NC";
+        break;
+    case GasType::N2:
+        gasName = "N2";
+        break;
+    case GasType::O2:
+        gasName = "O2";
+        break;
+    default:
+        gasName = "NC";
+        break;
+    }
+    ui->currentAtmosphereLineEdit->setText(gasName);
 }

src/ui/specificheatcomparisonmethodform.cpp

@@ -144,13 +144,13 @@ void SpecificHeatComparisonMethodForm::on_pushButtonCalculate_clicked()
     //
     float targetTemperature = ui->LineEditTemperature->text().toFloat();
 
-    PointCalculate::setExperimentData(*_baseLineDataVtr);
+    PointCalculate::setAnalysisData(*_baseLineDataVtr);
     QPointF baseLinePoint = PointCalculate::getClosestPointByX(targetTemperature);
 
-    PointCalculate::setExperimentData(*_standardSampleDataVtr);
+    PointCalculate::setAnalysisData(*_standardSampleDataVtr);
     QPointF standardSamplePoint = PointCalculate::getClosestPointByX(targetTemperature);
 
-    PointCalculate::setExperimentData(*_sampleDataVtr);
+    PointCalculate::setAnalysisData(*_sampleDataVtr);
     QPointF samplePoint = PointCalculate::getClosestPointByX(targetTemperature);
 
     logde<<"baseLinePoint:"<<baseLinePoint.x()<<","<<baseLinePoint.y();