#include "BSP.H"
/******************************** 功能说明 *************************************
 *	串口配置
 *******************************************************************************/
/******************************** 功能说明 *************************************
 *	串口1端口配置
 *******************************************************************************/
osMutexId( USART_Mutex_ID );
void BIOS_USART1_Init(void)
{
    USART_TypeDef *USARTx = USART1;

    SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);

    // USART1 configured as follow:
    // 	- BaudRate = 9600 baud
    // 	- Word Length = 8 Bits
    // 	- One Stop Bit
    // 	- No parity
    // 	- Hardware flow control disabled (RTS and CTS signals)
    // 	- Receive disable and transmit enabled
    USARTx->BRR = SystemCoreClock / 115200; /* 115200 bps						*/
    USARTx->CR1 = 0x0000u;                 /* 1 start bit, 8 data bits         */
    USARTx->CR2 = 0x0000u;                 /* 1 stop bit                       */
    USARTx->CR3 = 0x0000u;                 /* no flow control                  */
    SET_BIT(USARTx->CR1, USART_CR1_TE);    /* enable TX 						*/
    SET_BIT(USARTx->CR1, USART_CR1_RE);    /* enable TX 						*/
    SET_BIT(USARTx->CR1, USART_CR1_UE);    /* Enable USARTx					*/
    USART_ITConfig(USART1, /*USART_IT_TXE |*/ USART_IT_RXNE, ENABLE);

    /* Configure USART1 Rx (PA10) as input floating */
    /* Configure USART1 Tx (PA9) as alternate function push-pull */
    SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPAEN);
    MODIFY_REG(GPIOA->CRH, 0x00000FF0u, 0x000004B0u);

    NVIC_EnableIRQ(USART1_IRQn);
		osMutexDef( USART_Mutex );
	  USART_Mutex_ID = osMutexCreate( osMutex( USART_Mutex ) ); 
}
/******************************** 功能说明 *************************************
 *	访问 USART3，实现RS232收发
 *******************************************************************************/
void UART1_Send(uint8_t OutByte)
{
    USART_TypeDef *USARTx = USART1;

    while (!(READ_BIT(USARTx->SR, USART_SR_TXE))) {
        delay_us(100);
    }

    USARTx->DR = OutByte;
}
/******************************** 功能说明 *************************************
 *	访问 USART3，实现RS232收发
 *******************************************************************************/
uint8_t UART1_Received(void)
{
    USART_TypeDef *USARTx = USART1;

    while (!(READ_BIT(USARTx->SR, USART_SR_RXNE))) {
        ;
    }

    return USARTx->DR;
}
uint8_t DataInbuf[100u];
static volatile uint16_t UsartDelayTime = 0u;
static _Bool RxFlag                     = false;
static uint8_t Datai                    = 0u;
_Bool RxUpToDate                        = false;
/******************************** 功能说明 *************************************
 *
 *******************************************************************************/
void DataPrint(uint8_t *buffer, uint8_t lenth)
{
    uint8_t i;
		osMutexWait(USART_Mutex_ID,500000);
    //    CLEAR_BIT(USART1->CR1, USART_CR1_RXNEIE);
    for (i = 0u; i < lenth; i++) {
        UART1_Send(*buffer++);

        while (!READ_BIT(USART1->SR, USART_SR_TC))
            delay_us(50u);
    }
    //    SET_BIT(USART1->CR1, USART_CR1_RXNEIE);
		osMutexRelease(USART_Mutex_ID);
}

void DataRec(uint8_t *buffer)
{
    *buffer = UART1_Received();
}
void USART1_IRQHandler(void)
{
    if (READ_BIT(USART1->SR, USART_SR_ORE) != RESET) {
        DataInbuf[0] = (unsigned char)(USART1->SR);
        DataInbuf[1] = (unsigned char)(USART1->DR);
    }

    if (READ_BIT(USART1->SR, USART_SR_RXNE)) {
        if (!RxFlag) {
            Datai          = 0u;
            RxFlag         = true;
            TIM2->CNT      = 0u;
            UsartDelayTime = 0u;
            SET_BIT(TIM2->DIER, TIM_DIER_UIE); //
            SET_BIT(TIM2->CR1, TIM_CR1_CEN);
        }
        TIM2->CNT      = 0u;
        UsartDelayTime = 0u;
        DataRec(DataInbuf + Datai++);
    }
}
void BIOS_TIM2_TIMER_Init(void)
{
    SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);              //
    SET_BIT(TIM2->EGR, TIM_EGR_UG);                         //
    TIM2->CR1 = TIM_CR1_ARPE;                               //
    TIM2->PSC = (uint32_t)(SystemCoreClock / 100000u - 1u); //
    TIM2->ARR = 100u;                                       //
    CLEAR_BIT(TIM2->DIER, TIM_DIER_UIE);                    //
    CLEAR_BIT(TIM2->CR1, TIM_CR1_CEN);
    TIM2->CNT = 0u;
    NVIC_EnableIRQ(TIM2_IRQn);
}

osSemaphoreId semDataBack;
osSemaphoreDef(semDataBack);
void TIM2_IRQHandler(void)
{
    CLEAR_BIT(TIM2->SR, TIM_SR_UIF);
    if (RxFlag) {
        if (UsartDelayTime++ > 10u) // 1*10ms
        {
            CLEAR_BIT(TIM2->DIER, TIM_DIER_UIE); //
            CLEAR_BIT(TIM2->CR1, TIM_CR1_CEN);
            TIM2->CNT      = 0u;
            UsartDelayTime = 0u;
            RxFlag         = false;
            if ((DataInbuf[0] == 0xA5) && (DataInbuf[Datai - 1] == 0xAA)) //
            {
                DataInbuf[Datai] = '\0';
                osSemaphoreRelease(semDataBack);
            }
        }
    }
}

void USARTHMIInit()
{
    semDataBack = osSemaphoreCreate(osSemaphore(semDataBack), 0);
    BIOS_TIM2_TIMER_Init();
    BIOS_USART1_Init();
}